KDS2,KDS4,KD6,KD808,KD810,KD812 Series Fully Automatic Bottle-blowing Machine introduction ___ MOULD, MOLD, PLASTIC MOULD, INJECTION MOULD, PIPE FITTING MOULD, Turnover Case Mould, Auto-Motorcyle Series, Home Appliance Series, Commodity Series, Articles For Daily Use Series, Mould Series, Automobile bumper mould, TV Set shell mould, plastic chair mould series, plastic crate mould, 32 CAV newly hot runner without tail preform mould, Bend tee pipe mould series, washing machine shell mould, air conditoner mould,motor-cycle mould, vehicle lamp mould, Cleaner shell mould, Hot runner pathneedle valve spoon mould

Tel:0576-84013727

Fax:0576-84013727

Mobile:13906581679

E-mail:sales@chinabolun.com
bolunmold@126.com

KDS, KD8type technical parameter

Number	Item Name	Unit	KDS2	KDS4	KD6	KD808	KD810	KD812	KD814
1	Mould cavities	Cavity	2	4	6	8	10	12	14
2	Working pressure	bar	7-8	7-8	7-8	7-8	7-8	7-8	7-8
3	Air blowing pressure	bar	35	35	35	35	35	35	35
4	Height of bottle	mm	330	330	330	330	330	330	330
5	Stroke of opening mould	mm	130	130	130	130	130	130	130
6	Thickness of mould	mm	Ф190	Ф190	Ф190	Ф190	Ф190	Ф190	Ф190
7	Heat unit group	Group	4	4	5	6	10	10	10
8	Heated-light layer	Layer	9	9	9	9	9	9	9
9	Max heat power	Kw	20	20	40	50	80	80	80
10	Voltage	v	380	380	380	380	380	380	380
11	Frenquency	Hz	50/60	50/60	50/60	50/60	50/60	50/60	50/60
12	preform length	mm	≤180	≤180	≤180	≤180	≤180	≤180	≤180
13	Bottle neck diameter	mm	Ф20-Ф28	Ф20-Ф28	Ф20-Ф28	Ф20-Ф28	Ф20-Ф28	Ф20-Ф28	Ф20-Ф28
14	Bottle diameter range	mm	Ф20-Ф115	Ф20-Ф115	Ф20-Ф115	Ф20-Ф115	Ф20-Ф115	Ф20-Ф115	Ф20-Ф115
15	Preform raw material	kg	PET	PET	PET	PET	PET	PET	PET
16	Volume range	L	0.2-2	0.2-2	0.2-2.25	0.2-2	0.2-2	0.2-2	0.2-2
17	Capacity for mineral bottle	Pcs/h	2400	5000	7500	10000	12000	13500	14500
18	Capacity for heat-resistant bottle	Pcs/h	1600	3400	5300	6800	8000	9000	10000
19	Weight	kg	≤4000	≤4800	≤5800	≤8000	15000-17000	15000-17000	15000-19000
20	Dimension of main machine	mm	2300 x1700 x1800	2750 x2160 x1980	3100 x2310 x1980	3500 x2500 x1900	3400 x2600 x2600	3400 x2600 x3300	3400 x2600 x3300
21	Dimension of heater	mm	Is is the section of the main machine and contained in it.				5600 x1005 x2600	5600 x1005 x2600	5600 x1005 x2600
22	Preform-tidied machine size	mm					4000 x5400 x3500	4000 x5400 x3500	4000 x5400 x3500
23	Dimension of electrical box	mm					2400 x2100 x700	2400 x2100 x700	2400 x2100 x700